DMP 64

6x4 ProDSP™ Digital Matrix Processor
Key Features
  • 6x4 mic/line audio matrix mixer
  • ProDSP™ 32/64-bit floating point signal processing
  • Studio grade 24-bit/48 kHz analog-to-digital and digital-to-analog converters
  • Fixed, low latency DSP processing
  • DSP Configurator™ Software
  • Intuitive Graphical User Environment
The Extron DMP 64
Model Version Description Part #
DMP 64 6x4 ProDSP Processor 60-1054-01

The Extron DMP 64 Digital Matrix Processor is a 6x4 audio mixer featuring Extron ProDSP™, a powerful digital signal processing platform for audio signal routing and control. The DMP 64 offers a configuration approach to DSP that simplifies mixing, routing, and room optimization. Quick and intuitive configuration using the DSP Configurator™ Software allows the DMP 64 to be installed in very little time, with easy-to-learn adjustments that can be heard in real-time. The DMP 64 is ideal for presentation applications that require advanced line and microphone audio matrix mixing with DSP in a small form factor.

ProDSP

Extron’s exclusive ProDSP is engineered from the ground up using a powerful 64-bit floating point DSP engine to provide very wide dynamic range and reduce the potential for clipping. ProDSP also utilizes studio grade 24-bit audio converters with 48 kHz sampling to maintain audio signal transparency. ProDSP is loaded with powerful, easy-to-configure tools to control level, dynamics, filters, delay, ducking, loudness, and feedback suppression.

Easy-to-Use DSP Configurator Software

The power of ProDSP is easily harnessed with the DSP Configurator Software. The flexible on-screen layout offers fast access to all of the digital audio signal processing tools including level control, dynamics, filters, delay, ducking, loudness, feedback suppression, and matrix mixing. Designers can quickly get a snapshot view of the entire audio system, including processing blocks and routing assignments, all at once.

Flexible Routing

The DMP 64 features six mono mic/line inputs with phantom power. These inputs can be matrixed mixed into any of the four output buses to create finely tuned audio zones for the corresponding outputs. In addition, the six inputs can also be routed to any of the four “virtual” buses to allow inputs to be processed together as a group, before routing back into the output buses. The flexible routing capabilities within the DMP 64 allow system designers to create various signal management schemes to accommodate a variety of sound system application requirements.

Versatile Control Options

The DMP 64 can conveniently be controlled and configured via RS-232 serial control, Ethernet control, or USB. It also includes digital I/O ports, which allow for external triggering such as mic activation and muting.

Features

OPTIONAL ACCESSORIES
  MBU 125 Low-Profile Mount Kit for 1/4 and 1/2 Rack Width, Two-Piece Enclosures
  RSU 129 Universal Rack Shelf Kit for 9.5" Deep Products
  ZipClip 100 Mounting Kit for PS Series Power Supplies
  ZipClip 200 Mounting Kit for 1/8 and 1/4 Rack Width Products
RELATED PRODUCTS
  DSP Configurator Software DSP Application Software
  MVC 121 Plus Three Input Stereo Mixer with DSP
  SSP 7.1 Surround Sound Processor

Specifications

DMP 64
Audio system
   Gain Unbalanced output: -6 dB; balanced output: 0 dB
   Frequency response 20 Hz to 20 kHz, ±0.1 dB
   THD + Noise <0.01% @ 1 kHz, at maximum output level
   S/N >105 dB, 20 Hz to 20 kHz, at maximum output, unweighted
   Crosstalk <-90 dB @ 1 kHz, fully loaded
   CMRR >70 dB @ 1 kHz
Audio input
   Number/signal type 6 mono, mic/line, balanced/unbalanced
   Connector (6) 3.5 mm captive screw connectors, 3 pole
   Impedance >10k ohms unbalanced/balanced
   Nominal level +4 dBu when level is set to 0 dB gain; adjustable from -60 dBu to +4 dBu
   Maximum level +24 dBu, balanced, when input gain is set to -3 dB
   Noise level <-120 dBV (1 µVrms) at 40 dB gain
   Volume range -18 dB to +80 dB, mic/line input, adjustable per input
   Mic phantom power +48 VDC, which can be switched on or off
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio processing
   A/D, D/A conversion 24 bit, 48 kHz sampling
Audio output
   Number/signal type 4 mono, balanced/unbalanced
   Connectors (4) 3.5 mm captive screw connectors, 3 pole
   Impedance 50 ohms unbalanced, 100 ohms balanced
   Gain error ±0.1 dB channel to channel
   Maximum level (Hi-Z) >+21 dBu balanced, >+15 dBu unbalanced
Control/remote
   Serial host control port 2 bidirectional RS-232, 3.5 mm captive screw connector, 3 pole
   Baud rate and protocol 38400 baud, 8 data bits, 1 stop bit, no parity
   Serial control pin configuration 1 = Tx, 2 = Rx, 3 = Gnd
   USB control ports 1 front panel female mini USB B
   USB standards USB 2.0, low speed
   Digital I/O 

(2) 3.5 mm captive screw connectors, 4 pole
Each port shares a common ground
6 configurable digital I/0 ports
Input voltage range = 0V to +12V
Output voltage = 0V (low), 5V (high)
Software programmable

   Ethernet host port 1 RJ-45 female
   Ethernet data rate 10/100Base-T, half/full duplex with autodetect
   Ethernet default settings Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Default gateway = 0.0.0.0
DHCP = off
   Web server Up to 200 simultaneous sessions
6.5 MB nonvolatile user memory
   Program control Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS)
Microsoft® Internet Explorer®, Telnet
General
   Power input requirements 12 VDC
   Power supply External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1.5 A, 18 Watts
   Power consumption 
      Device 13.5 W
      Device and power supply 16.2 W
   Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling Convection, no vents
   Thermal dissipation 
      Device 45.8 BTU/HR
      Device and power supply 55.2 BTU/HR
   Mounting 
      Rack mount Yes, with optional 1U rack shelf
      Furniture mount Yes, with optional under-desk mounting kit
   Enclosure type Metal
   Enclosure dimensions 1.7" H x 8.75" W x 9.5" D (1U high, half rack wide)
(4.3 cm H x 22.2 cm W x 24.1 cm D)
(Depth excludes connectors)
   Product weight 1.9 lbs (0.9 kg)
   Regulatory compliance CE, C-tick, c-UL, FCC Class A, ICES, RoHS, UL, VCCI, WEEE
   Warranty 3 years parts and labor
   Everlast power supply warranty 7 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(4055-D7)
Shipping Dimensions and Weights
    Part # Height Width Depth Weight
    60-1054-01 5.5" (14.0 cm) 13.5" (34.3 cm) 14.5" (36.8 cm) 4.15 lbs (1.88 kg)

Diagram

Application Diagram

Panel Drawing

Panel Drawing
© 2019 Extron. Specifications are subject to change without notice.